Replacement gasket seal to suit Bomar Low Profile A & P series NIBO Extruded Deck Hatches with 6mm lens thickness - made after 1999.

Bomar MPN: P2000-09

Suits Bomar Hatch Part Numbers:

  • N1011-10P
  • N1000-10P

Features:

  • Black rubber gasket
  • Sold per foot

Instructions on Replacing Bomar Hatch Gasket with Lip:

  1. Pull out the old gasket 
     
  2. Starting near a hinge, gently push the lip of the gasket into the space between the lens and extrusion.
     
  3. Carefull cut the gasket to length forming a butt joint
     
  4. Pull out two inches of the gasket either side of the joint and super glue together. Be very careful not to get superglue on the lens. Leave for about 5 minutes to allow the adhesive to completely set.
     
  5. Push gasket back into the cavity and apply a drop of glue in the four corners to secure the gasket in place.
SKU JPW170900
Barcode # 2674651292282
Shipping Weight 0.0400kg
Shipping Width 0.020m
Shipping Height 0.020m
Shipping Length 0.310m

Be The First To Review This Product!

Help other searenitymarine users shop smarter by writing reviews for products you have purchased.

Write a product review